Metal roof panels are the new secret to secure, robust, and reliable roofing solutions. Thankfully people are beginning to realize its immense benefits. They outperform other options in terms of both style or appearance and performance. The only problem most people face is the installation process, explicitly identifying the correct metal roof screw pattern; however, that shouldn’t be an issue anymore, as this post will shed some light on determining the ideal practice. You want your new roof to stand the test of time and remain intact for as long as it was designed to; achieving this starts with how you connect your screws.
Here’s what a metal screw pattern means
If you have little or no experience in metal roofing, you’re probably wondering what a screw pattern is. That is essentially the screw sequence, design, and spacing you use when installing roofing panels. If you’re wondering why this is even important, it assures you of a more secure fit. Exports have created special roof screws to help hold your panels in place. This also means you won’t have to worry about leaks and damaging gaps between the boards.
Before you install your panels, take some time to understand the factors referenced below
The first factor is the weather conditions in your area. Believe it or not, the weight of snow you often experience in your area, rainfall patterns, and how the wind moves can all determine what screw pattern to use. There’s a second factor worth keeping in mind and that has to do with how much your roof slopes. Take the time to observe its steepness and notice the sloping angle. These will affect wind movement and water distribution on the roof’s surface and once done, your next step is to identify your roof’s design. If it comes with any specific instructions regarding installation, that could also affect what screw pattern to use. Aside from the design, you may have to do a little research about building codes and structural regulations you may have to follow. Again, this could also impact your ideal screw pattern.
Lastly, what makes a metal roof screw pattern so important?
For starters, you’ll avoid leakages. Roof leakages are a nightmare, but you can avoid this problem by creating watertight seals between your roof panels, keeping water away from the joints. Another important thing is that you won’t worry too much about expansion and contraction, but that’s not all; your roof will also resist uplift forces. Thanks to the correct screw pattern, your panels won’t leave their position; it doesn’t matter how fiercely the wind blows.
You’ll also experience a pressure-free roof surface; however, snow pile-up, wind movement, and even too much rainfall, in addition to the other elements, can affect the distribution of your panels. And while you may notice it later, this uneven distribution will begin to compromise your entire installation. If it’s all getting too complicated, your best bet is to hire an expert.